According to GB/T16483-2008、GB/T17519-2013 Version 3.0
SDS No. CP8600 /S400
SAFETY DATA SHEET
Softening Agent (Low-Yellowing All-Round Softener Flake S400)
Product ： Softening Agent (Low-Yellowing All-Round Softener Flake S400) Company ： Zhejiang Liansheng New material Co., Ltd.
Address ： Haixia Road No.68, Xitangqiao Street, Haiyan, Jiaxing City, Zhejiang , China. Post Code： 215134
Emergency Tel： 86-512-65906880 Fax：86-512-65905880 Website ： www.lshx.cn
GHS hazard class(es): The product is classified and labeled in accordance with GHS regulation and the relevant national laws.
Serious eye damage Category 1 Signal word : No signal-word.
Hazard statements Precautionary statements Prevention
Storage
Disposal
Symbol
: H319 - Causes serious eye irritation
: Wash skin thoroughly after handling. Wear protective gloves/ protective clothing/ eye protection/ face protection.
: Store in accordance with all local, regional, national and
international regulations.
: P501 - Dispose of contents and container in accordance with all local, regional, national and international regulations.
Other hazards which do not : None known.
result in classification
According to GB/T16483-2008、GB/T17519-2013 Version 3.0
SDS No. CP8600 /S400
Main Composition：compound of fatty acids and amines
Stearic acid. CAS. 57-11-4
Aminoethylethanolamine. CAS. 111-41-1 Appearance ：yellowish flake
Main Function：used for soft finishing of cotton fabric, imparts fabric with excellent soft hand-feeling.
Inhalation : Remove victim to fresh air and keep at rest in a position comfortable for breathing.
If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. It may be dangerous to the
person providing aid to give mouth-to-mouth resuscitation. Get medical attention if adverse health effects persist or are severe. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband. In case of inhalation of decomposition products in a fire, symptoms may be delayed. The exposed person
may need to be kept under medical surveillance for 48 hours.
Ingestion : Wash out mouth with water. Remove dentures if any. Remove victim to fresh air and keep at rest in position comfortable for breathing. If material has been swallowed
and the exposed person is conscious, give small quantities of water to drink. Stop if the exposed person feels sick as vomiting may be dangerous. Do not induce vomiting unless directed to do so by medical personnel. If vomiting occurs, the head should be
kept low so that vomit does not enter the lungs. Get medical attention if adverse health effects persist or are severe. Never give anything by mouth to an unconscious person. If unconscious, place in recovery position and get medical attention
immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband.
Skin contact: Flush contaminated skin with plenty of water. Remove contaminated clothing
and shoes. Get medical attention if symptoms occur. Wash clothing before reuse. Clean shoes thoroughly before reuse.
Eye contact : Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10 minutes. Get medical attention if irritation occurs.
Most important symptoms/effects, acute and
delayed Potential acute health effects
Inhalation
Ingestion
: No known significant effects or criticalhazards
: No known significant effects or criticalhazards.
According to GB/T16483-2008、GB/T17519-2013 Version 3.0
SDS No. CP8600 /S400
Skin contact :
Eye contact :
No known significant effects or criticalhazards.
No known significant effects or criticalhazards.
Over-exposure signs/symptoms Inhalation : No specific data.
Ingestion
Skin
Eyes
: No specific data
: No specific data.
: No specificdata.
Extinguishing media
Suitable : Use an extinguishing agent suitable for the surrounding fire Not suitable : none known
Specific hazards arising : In a fire or if heated, a pressure increase will occur and the container may burst
from the chemical
Hazardous thermal :
This material is toxic to aquatic life with long lasting effects. Fire water contaminated with this material must be contained and prevented from being discharged to any waterway, sewer or drain.
Decomposition products may include the following materials:
decomposition products Special precautions for
fire- fighters:
carbon dioxide; carbon monoxide ; nitrogen oxides
Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal
risk or without suitable training.
Remark : Not available.
Emergency measures&
Personal protection: keep away from eyes and wear protective articles.
Environment protection ： limit entry of non production workers and collect and put leakage
material in sealed container, rinse the spot and discharge waste water into specified water treatment system.
Handle
Take care of load and unload in order to avoid sprinkle due to package breakage. easily agglomerate exposed to the moisture, it’s inadvisable to handle them when raining, unless under rain shelter.
Storage
According to GB/T16483-2008、GB/T17519-2013 Version 3.0
SDS No. CP8600 /S400
Can be stored one year in cool and well-ventilated warehouse, avoid insolation, seal the drum immediately after use, the shelf life is 12 months.
Appropriateengineering
controls ：Good general ventilation should be sufficient to control worker exposure to airborne contaminants
Environmentalexposure
controls : Emissions from ventilation or work process equipment should be checked to ensure
they comply with the requirements of environmental protection legislation. In some cases, fume scrubbers, filters or engineering modifications to the process
equipment will be necessary to reduce emissions to acceptable levels.
Engineer Control: keep workshop and storage room ventilated and materials sealed.
Operation Protection: keep materials away from eyes and ventilate during production and usage. Thoroughly rinse after operation.
Personal Protection
Hand protection : Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk
assessment indicates this is necessary. Use gloves approved to relevant standards e.g. EN 374 (Europe), F739 (US). Suitability and durability of a glove is dependent on usage, e.g. frequency and duration of contact, chemical resistance of glove material
and dexterity. Always seek advice from glove suppliers.
Eye protection : Safety eyewear complying with an approved standard should be used when a risk
assessment indicates this is necessary to avoid exposure to liquid splashes, mists, gases or dusts. If contact is possible, the following protection should be worn, unless the assessment indicates a higher degree of protection: safety glasses with
side-shields.
Skin protection : Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.
Appearance：flake Color：yellowish Odor : slightly odorous
Ionicity: weak cat-ionic
According to GB/T16483-2008、GB/T17519-2013 Version 3.0
SDS No. CP8600 /S400
pH : 3.5-5.0 (10% aqueous solution)
Solubility：can completely dissolved by warm water.
Flammability (solid, gas) : Not available. Vapour pressure : Not available.
Chemical stability: stable under in cool and well ventilated conditions.
Possibility of hazardous : Under normal conditions of storage and use, hazardous reactions Reactions will not occur
Conditions to be avoided: No specificdata.
Hazardous decomposition : Under normal conditions of storage and use, hazardous decomposition
Products
products should not be produced.
Toxicological Information
Acute Toxicity : LD50 /( rat) ＞2400mg/kg
Primary irritant effect:
On the skin：non-irritant
Inhalation：has no affect on respiratory tract due to non volatile flake.
Skin sensitization：no occur about allergic reaction, wash thoroughly after contact skin.
Potential chronic health effects
Inhalation : Ingestion :
No known significant effects or critical hazards.
No known significant effects or critical hazards.
Skin contact : Eye contact :
No known significant effects or critical hazards.
Eye damage: Category 2A
Carcinogenicity : No known significant effects or critical hazards. Mutagenicity : No known significant effects or critical hazards. Teratogenicity : No known significant effects or critical hazards. Developmental effects : No known significant effects or critical hazards. Fertility effects : No known significant effects or critical hazards.
Delayed and immediate effects and also chronic effects from short and long term exposure Short term exposure
Potential immediate effects : Not available. Potential delayed effects: Not available . Long term exposure
Potential immediate effects : Not available.
According to GB/T16483-2008、GB/T17519-2013 SDS No. CP8600 /S400
Version 3.0
Potential delayed effects: Not available .
Aspiration hazard : Not available
Environmental effects : Not readily biodegradable, water polluting material.May be harmful to the environment if released in large quantities. This material is toxic to aquatic life with long lasting effects.
Aquatic and terrestrial toxicity
LC50: ＞200mg/L ( OECD 202 Daphnia sp.acute immobilisation test ) Ecological Degradation：77% (28 d) Method : OECD Test Guideline 302B Mobility : Not available
BOD 5 : 160 mg O2/ g COD : 200 mg O2/ g
Metal Content : Metal content under the ETAD recommended limits. Other adverse effects :No known significant effects or critical hazards.
Disposal methods: The generation of waste should be avoided or minimized wherever possible. Disposal of this product,solutions and any by-products should at all times comply with the requirements of environmental protection and waste disposal legislation
and any regional local authority requirements. Waste can’t discharged into sewer and any water area or on ground unless fully compliant with the requirements of all authorities with jurisdiction. This material and its container must be disposed of in a safe way.
According to GB/T16483-2008、GB/T17519-2013 Version 3.0
SDS No. CP8600 /S400
International transport regulations
Land transport（UN）: Not regulated for transport or dangerous goods
Air transport (ICAO-IATA / DG): Not regulated for transport or dangerous goods
Sea transport(IMDG-Code /GGVSee): Not regulated for transport or dangerous goods
Transport patterns: Sea transport、railway transport、road transport
Cautions during transport:Do not leak, avoid water
15.1 Safety,health and environmental regulations/legislation specific for the substance or mixture National and local regulations must be observed.
15.2 Other international regulations
Details of international registration status:
Listed on or in accordance with the following inventories: EINECS- Europe
Reference Literature
New Regulations for Chemicals Safety Management Yu Zhiming Chief Editor Chemical Industry Press 2021；
Safety Management for chemicals on working area Shan Chunchang Chief Editor Chemical Industry Press 2021；
Work handbook for Chemicals safety original Labour Safety Bureau of Chemicals Industry Filled on: Jan.1st, 2024
Filled by:Tech. Dept of Textile chemicals Zhejiang Liansheng New Material Co., Ltd. Check Unit Zhejiang Liansheng New Material Co., Ltd.
Edit Version
based on existing materials
the third 2024
This information is based on our present knowledge and certainly correct and latest. However it shall not constitute commitment and responsibility for any specific products. Only as instruction as be used by clients, it shall not establish a legally valid contractual relationship.
Date of printing: June. 12.2023
SECTION 1. Identification of Substance and Company
SECTION 2. Hazards Identification
:
Date of printing: June. 12.2023
SECTION 3. Main Composition/Property
SECTION 4. First aid measures Description of necessary first aid measures
Date of printing: June. 12.2023
SECTION 5. Flammability & explosibility and fire fighting measures
SECTION 6 Leakage Emergency Measures
SECTION 7 Handle and storage
Date of printing: June. 12.2023
SECTION 8 Protection Measures
SECTION 9. Physical and chemical Properties
Date of printing: June. 12.2023
SECTION 10. Stability and Reactivity
SECTION 11.
Date of printing: June. 12.2023
SECTION 12. Ecological Information
SECTION 13. Disposal consideration
Date of printing: June. 12.2023
SECTION 14. Transport Information
SECTION 15. National and International Regulations
SECTION 16. Other Information
Product center