Textile auxiliaryYour position: Home > Products and service > Product center > Textile auxiliary
SAFETY DATA SHEET Soaping agent DF-5
 点击数:5次 添加时间:2026-07-07 [打印] [返回] [收藏]


SAFETY DATA SHEET

Soaping agent DF-5

 

 

SECTION 1. Identification of Substance and Company

 

Product   Soaping agent DF-5

Company  Zhejiang Liansheng New material Co., Ltd.

Address   Haixia Road No.68, Xitangqiao Street, Haiyan, Jiaxing City, Zhejiang , China.

Post Code 314300

Emergency Tel 86-512-65906880       Fax86-512-65905880

Website  www.lshx.cn

SECTION 2.  Hazards Identification

 

GHS hazard class(es):   The product is classified and labelled in accordance with GHS regulation and the relevant national laws.

Serious eye damage Category 1 Signal word                     :  No signal word.

Hazard statements               : H319 - Causes serious eye irritation

Precautionary statements

Prevention                      : P273 - Avoid release to the environment

Response                               : P391 - Collect spillage.

Storage                                               : Store in accordance with all local, regional, national and

international regulations.

Disposal                                        : P501 - Dispose of contents and container in

accordance with all local, regional, national and

international regulations.

Symbol                         :                             

 

Other hazards which do not       :  None known.

result in classification


 

 

SECTION 3. Main Composition/Property

 

Main Composition

EDTMPS:                 CAS : 1429-50-1   40-60%

Maleic acid acrylic acid copolymer :  CAS26677-99-6  40-60% Appearance white powder

Main Function: used for soaping process of reactive dyeing or printing of cotton

SECTION 4.   First aid measures

Description of necessary first aid measures

Inhalation : Remove victim to fresh air and keep at rest in a position comfortable for breathing.

If not breathing, if breathing is irregular or if respiratory arrest occurs, provide

artificial respiration or oxygen by trained personnel. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation. Get medical attention if adverse health effects persist or are

severe. If unconscious, place in recovery position and get medical attention immediately. Maintain

an open airway. Loosen  tight clothing such as a collar, tie, belt or waistband. In case of inhalation of decomposition products in a fire, symptoms may be delayed. The exposed person  may need to be

kept under medical surveillance for 48 hours.

 

Ingestion : Wash out mouth with water. Remove dentures if any. Remove victim to fresh air and keep at rest in apposition comfortable for breathing. If material has been swallowed  and the

exposed person is conscious, give small quantities of water to drink. Stop if the exposed person feels sick as vomiting may be dangerous. Do not induce vomiting  unless directed to do so by

medical personnel. If vomiting occurs, the head should be  kept low so that vomit does not enter the lungs. Get medical attention if adverse  health effects persist or are severe. Never give

anything by mouth to an unconscious  person. If unconscious, place in recovery position and get medical attention  immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband.

 

 

Skin contact:  Flush contaminated skin with plenty of water. Remove contaminated clothing and shoes. Get medical attention if symptoms occur. Wash clothing before reuse. Clean shoes thoroughly before reuse.

Eye contact: Immediately flush eyes with plenty of water, occasionally lifting the upper and lower

eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10 minutes. Get medical attention if irritation occurs.


 

 

 

 

 

Most important symptoms/effects, acute and delayed Potential acute health effects Inhalation :  No known significant effects or critical hazards

Ingestion   :  No known significant effects or critical hazards.

 

Skin contact :  No known significant effects or critical hazards.

Eye contact :   No known significant effects or critical hazards.

Over-exposure signs/symptoms Inhalation  : No specific data.

Ingestion  : No specific data

Skin      : No specific data.

Eyes      : No specific data.

 

 

 

SECTION 5. Flammability & explosibility and firefighting measures

 

 

Extinguishing media

Suitable : Use an extinguishing agent suitable for the surrounding fire

Not suitable : none known

Specific hazards arising: In a fire or if heated, a pressure increase will occur and the container may burst

from the chemical          This material is toxic to aquatic life with long lasting effects. Fire water

contaminated with this material must be contained and prevented from being discharged to any waterway, sewer or drain.

Hazardous thermal :       Decomposition products may include the following materials: decomposition products   carbon dioxide; carbon monoxide ; nitrogen oxides

Special precautions for   Promptly isolate the scene by removing all persons from the vicinity of the fire- fighters:                    incident if there is a fire. No action shall be taken involving any personal

risk or without suitable training.

Remark : Not  available.


 

 

 

 

 

 

SECTION 6 Leakage Emergency Measures

 

Emergency measures&

Personal protection: keep away from eyes and wear protective articles.

Environment protection  limit entry of nonproduction workers and collect and put leakage

material in sealed container, rinse the spot and discharge waste water into specified water treatment system.

 

 

SECTION 7   Handle and storage

 

 

Handle

Take care of load and unload in order to avoid sprinkle due to package breakage. easily agglomerate exposed to the moisture, it’s unadvisable to handle them when raining, unless under rain shelter.

Storage

Can be stored one year in cool and well-ventilated warehouse, avoid insolation, seal the drum immediately after use, the shelf life is 12 months.

 

 

SECTION 8 Protection Measures

 

 

Appropriate engineering

controls  Good general ventilation should be sufficient to control worker exposure to airborne contaminants

 

Environmental exposure

controls :    Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation. In some cases, fume

scrubbers, filters or engineering modifications to the process equipment will be necessary to reduce emissions to acceptable levels.

 

Engineer Control: keep workshop and storage room ventilated and materials sealed.

Operation Protection: keep materials away from eyes and ventilate during production and usage.

Thoroughly rinse after operation.


 

 

 

 

Personal Protection

Hand protection : Chemical-resistant, impervious gloves complying with an approved standard

should be worn at all times when handling chemical products ifa risk  assessment indicates this is necessary. Use gloves approved to relevant standards e.g.  EN 374 (Europe), F739 (US). Suitability and durability of a glove is dependent on  usage, e.g. frequency and duration of contact, chemical resistance of glove material

and dexterity. Always seek advice from glove suppliers.

Eye protection :  Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists, gases or dusts. If

contact is possible, the following protection should be worn, unless the assessment indicates a higher degree of protection: safety glasses with side-shields.

Skin protection : Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.

 

 

 

SECTION 9.   Physical and chemical Properties

 

Appearance: powder

Color: white

Odor : slightly odorous

Ionicity: nonionic

pH   :       7.0-8.0    (1%    aqueous    solution) Solublity    can    dissolved    with    water Flammability (solid, gas) :  Not  available.

Vapor pressure: Not available.

SECTION 10.   Stability and Reactivity

 

 

Chemical stability:           stable under in cool and well ventilated conditons.

Possibility of hazardous : Under normal conditions of storage and use,  hazardous reactions Reactions                            will not occur

Conditions to be avoided: do not mix or storage with reductive chemicals together

Hazardous decomposition : Under normal conditions of storage and use, hazardous Products                                decomposition products should not be produced.


 

 

 

 

 

 

 

SECTION 11.  Toxicological Information

 

Information on the likely routes of exposure

Inhalation :  No known significant effects or critical hazards.

Ingestion :    No known significant effects or critical hazards.

Skin contact :  No known significant effects or critical hazards.

Eye contact :  No known significant effects or critical hazards.

Symptoms related to the physical, chemical and toxicological characteristics Inhalation :  No specific data.

Ingestion :    No specific data.

Skin contact :  No specific data.

Eye contact :  No specific data.

 

Acute Toxicity : LD50   /( rat) >3000mg/kg Primary irritant effect:

On the skinnon-irritant

 

Inhalationhas no affect on respiratory tract due to non volatile flake.

 

Skin sensitizationno occur about allergic reaction, wash thoroughly after contact skin.

 

Potential chronic health effects

Inhalation :  No known significant effects or critical hazards.

Ingestion :    No known significant effects or critical hazards.

Skin contact :  No known significant effects or critical hazards.

Eye contact :  No known significant effects or critical hazards.

Carcinogenicity : No known significant effects or critical hazards.

Mutagenicity : No known significant effects or critical hazards.

Teratogenicity : No known significant effects or critical hazards.

Developmental effects : No known significant effects or critical hazards.

Fertility effects : No known significant effects or critical hazards.


 

 

 

 

 

 

 

Delayed and immediate effects and also chronic effects from short and long term exposure Short term exposure

Potential immediate effects : Not available.

Potential delayed effects: Not available .

Long term exposure

Potential immediate effects : Not available.

Potential delayed effects: Not available .

 

Aspiration hazard : Not available .

 

 

 

SECTION 12.   Ecological Information

 

 

Environmental effects : Not readily biodegradable, water polluting material.May be harmful to  the environment if released in large quantities. This material is toxic to aquatic life with long lasting effects.

Aquatic and terrestrial toxicity

LC50: >200mg/L ( OECD  202 Daphnia sp.acute immobilisation test )

 

Ecological Degradation>90%

Mobility : Not available

BOD 5 : Not available

COD  : Not available

Metal Content : Metal content under the ETAD recommended limits.

Other adverse effects :No known significant effects or critical hazards.


 

 

 

 

 

 

 

SECTION 13.   Disposal consideration

 

 

Disposal methods: The generation of waste should be avoided or minimised  wherever possible.

Disposal of this product,solutions and any by-products should at all times

comply  with the requirements of environmental protection and waste disposal legislation  and any regional local authority requirements. Waste can’t

discharged into sewer  and any water area or on ground unless fully compliant with the requirements of all authorities with jurisdiction. This material and its container must be disposed of in a safe way.

 

 

 

SECTION 14.   Transport Information

 

International transport regulations

Land transportUN: Not regulated for transport or dangerous goods

Air transport (ICAO-IATA / DG): Not regulated for transport or dangerous goods

Sea transport(IMDG-Code /GGVSee): Not regulated for transport or dangerous goods

Transport patterns: Sea transport, railway transport, road transport

Cautions during transport: Do not leak, avoid water

SECTION 15.   National and International Regulations

 

15.1 Safety,health and environmental regulations/legislation specific for the substance or mixture

National and local regulations must be observed.

15.2 Other international regulations

Details of international registration status:

Listed on or in accordance with the following inventories:

EINECS- Europe


SECTION 16.   Other Information

 

 

Reference Literature

New Regulations for Chemicals Safety Management Yu Zhiming  Chief Editor  Chemical Industry Press 2001;

Safety Management for chemicals on working area  Shan Chunchang Chief Editor  Chemical Industry Press 2000;

Work handbook for Chemicals safety original Labour Safety Bureau of Chemicals Industry

Filled on: Jan. 1st, 2026

Filled by: Tech. Dept of Textile chemicals Zhejiang Liansheng New Material Co., Ltd.

Check Unit  Zhejiang Liansheng New Material Co., Ltd.

Edit   :    based on existing materials

Version  :  the fourth 2026

 

This information is based on our present knowledge and certainly correct and latest. However, it shall not constate commitment and responsibility for any specific products. Only as instruction as be used by clients, it shall not establish a legally valid contractual relationship.